This quality tile comes in a format that proved its worth for decades and is thus suitable for almost any application – particularly if you wish to easily replace an existing coverage with high-quality burnt-clay products. This natural product lastingly increases the value of your roof, considerably enhances an atmosphere of well-being and to top it all, adds a further advantage with its optimized interlocking.
In addition, „MAXIMA“ offers a wide colour range with fine baked, engobe-slipped and glazed surfaces. Three head ribs offer an improved protection against the intrusion of rain and thus, a clever alternative for a value-increasing roof coverage that uses one of the oldest and best building materials, natural clay.
|Size:||approx. 333 x 403 mm|
| ||min. approx.||on av. approx.||max. approx.|
|Covering width:||300 mm||300 mm||300 mm|
|Covering length:||310 mm||330 mm||350 mm|
| ||max. approx.||on av. approx.||min. approx.|
|Tile requirement:||10,8 Pcs./m²||10,1 Pcs./m²||9,5 Pcs./m²|
|Weight||approx. 4,3 kg/pcs.||approx. 43,4 kg/m²|
|Small pack: 4 Piece||Pallet: 240 Piece|
|SF 9 with surface tile 3.0 pcs./m||LAF||40||40||40||40||40||40||40||-||-||-|
|SF 9 with ridge connection ventilation tile||LAF||80||80||80||75||75||75||75||75||75||75|
|LAF = distance between laths and ridge intersection, FLA = distance between ridge laths|
Measurements apply to 30/50-laths.
In case of 40/60-laths, CREATON will supply the LAF-measurements on demand.
|Verge tiles, double bead||Ridge connection ventilation tile, shed tile|
|approx. 3.0 pcs./m||approx. 3.3 pcs./m|
Extensive fluidic test have confirmed the superior protection oagainst the intrusion of rain of our model „MAXIMA NEU“- RG 9. The sophisticated interlockings
allow for the protection against the intrusion of rain in case of roof pitches of 16° by means of a trussing sheet (CREATON „UNO“), of 14° using a heat-sealed or bonded sub-coverage sheet (CREATON „DUO“), of 12° with a rainproof sub-roof (CREATON „TRIO“) necessary according to our conditions of warranty. We would be pleased to advise you with regard to the execution of the sub-roof area. In case of lath distances in the minimum/maximum limit range, it is absolutely necessary to indicate the lath distances in your order!
Minor colour and size deviations are possible due to the natural variations of the raw clay.