„BALANCE“ opens a completely new era in roof design as far as cost-effectiveness and design are concerned. The top quality and the well-balanced proportions particularly suitable for large roof surfaces and at the same time for small roofs as well, allow for the cost-effective laying, highest safety as a result of the sophisticated interlocking technology and thus for a lasting value. „BALANCE“ is a true success story.
With a tile requirement of approx. 8.4 tiles/m², CREATON offers a tile proving not only exemplary qualities and sensational beauty, but a tile that also sets new standards with regard to cost-effectiveness. In addition, the tile convinces as a result of its large sliding clearance of 26 mm, its improved statics owing to pronunced support ribs and its stable suspension lugs.
|Size:||approx. 323 x 502 mm|
| ||min. approx.||on av. approx.||max. approx.|
|Covering width:||274 mm||275 mm||277 mm|
|Covering length:||406 mm||419 mm||431 mm|
| ||max. approx.||on av. approx.||min. approx.|
|Tile requirement:||9,0 Pcs./m²||8,7 Pcs./m²||8,4 Pcs./m²|
|Weight||approx. 4,4 kg/pcs.||approx. 38,2 kg/m²|
|Small pack: 4 Piece||Pallet: 192 Piece|
|LAF = distance between laths and ridge intersection, FLA = distance between ridge laths|
Measurements apply to 30/50-laths.
In case of 40/60-laths, CREATON will supply the LAF-measurements on demand.
|Verge tiles, double bead, half-tile||Ridge connection ventilation tile, shed tile|
|approx. 2.4 pcs./m||approx. 3.7 pcs./m|
Extensive fluidic tests have confirmed the superior protection against the intrusion of rain of our model „BALANCE“. The sophisticated interlockings allow for the protection against the intrusion of rain in case of roof pitches of 16° by means of a trussing sheet (CREATON „UNO“), of 14° using a heat-sealed or bonded sub-coverage sheet (CREATON „DUO“), of 12° with a rainproof sub-roof (CREATON „TRIO“) necessary according to our conditions of warranty. We would be pleased to advise you with regard to the execution of the sub-roof area. In case of lath distances in the minimum/maximum limit range, it is absolutely necessary to indicate the lath distances in your order!
Minor colour and size deviations are possible due to the natural variations of the raw clay.